HP 460 |
The HP 460 LTO Ultrium tape drive is the next generation of HP's Ultrium family, delivering a 400 GB capacity (assuming 2:1 data compression) on a single cartridge. Reinforcing Hp's leadership position in tape, it builds on the success of the HP Ultrium 230 and HP Ultrium 215 drives, providing unprecedented levels of performance, capacity and reliability and setting new standards in the superdrive tape market. With a transfer rate of 60 MB/sec, the HP 460 LTO Ultrium is the ideal choice for enterprise-class data protection needs, particularly where the backup window is shrinking.
Features & Benefits
- Stores 400 GB in under 2 hours (assuming 2:1 data compression)
- Evolution from the very successful first generation of Ultrium tape drives
- Lowest cost per GB of any tape drive
- Cartridge memory helps to improve media management and reliability
- Successfully tested with a broad range of servers, operating systems and backup packages
 Download the HP 460 product sheet (274k PDF)
| HP 460 LTO Ultrium Models |
Part Number |
Ultrium 460 for ProLiant, Internal (carbon)
note: For HP ProLiant and Alphaservers. |
Q1518A |
Ultrium 460 for ProLiant, External (carbon)
note: For HP ProLiant and Alphaservers. |
Q1519A |
Ultrium 460, Internal (flint grey)
note: For HP-UX and third-party servers. |
Q1508A |
Ultrium 460, External (flint grey)
note: For HP-UX and third-party servers. |
Q1509A |
Ultrium 460, Array Module (flint grey)
note: For HP-UX and third-party servers. |
Q1512A |
Ultrium 460 Array Module, Factory-racked (flint grey)
note: For HP-UX and third-party servers. |
Q1512A#0D1 |
 |
 |
| HP 460 External |
HP 460 Internal |
| HP 460 LTO Ultrium Tape Drive |
| Capacity |
200 GB (400 GB per cartridge at 228 GB) |
| Recording Technology |
8-channel linear serpentine recording on half-inch media |
| Media Compatibility |
LTO Ultrium1 (609 m ± 1m Metal Particle (MP++) formulation with 4K Cartridge Memory)
LTO Ultrium 2 (609m, 1/2" tape, Metal Particle (MP++) formulation with 4K Cartridge Memory) |
| Interface |
Type: Wide Ultra3 SCSI (LVDS)
SCSI Connector:
Internal: 68-pin LVDS
External: 68-pin HD LVDS
Array module: 80-pin SCA (SCSI and power) |
| Sustained Transfer Rate |
Ultrium 2 Media: 30 MB/s native (60 MB/s with 2:1 compression)
Ultrium 1 Media: 20 MB/s native (40 MB/s with 2:1 compression) |
| Burst Transfer Rate |
160 MB/s (with Ultra3 SCSI wide) |
| MTBF |
250,000 hours at 100% duty cycle |
Dimensions (H x W x D)
Internal
Rackmount
External |
3.25 X 5.75 X 8.0 in (8.3 x 14.6 x 20.3 cm)
6.3 x 3.4 x 11.9 in (16.1 x 8.7 x 30.3 cm)
4.6 x 8.2 x 11.5 in (11.8 x 20.8 x 29.2 cm) |
Weight
Internal
Rackmount
External |
4.6 lb (2.1 kg)
7.88 LB (3.6 kg)
12.1 LB (5.5 kg) |
| Form Factor (internal) |
5¼ inch full-height |
Power Requirements
Internal
Rackmount
External |
+5V @ 3.2A (typical)
+5V @ 6.3A (max)
+12V @ 0.7A (typical)
+12V @ 2.75A (max)
+5V @ 5.2A (typical)
+5V @ 6.3A (max)
+12V @ 0.7A (typical)
+12V @ 2.75A (max)
100-240 VAC, 50/60Hz (auto-ranging)
0.7A max
Power connection IEC 320
|
| Power Consumption |
Min 18 W (idle)
Max 32 W (writing) |
|
